How To Paint A Wooden Screen Door

Download Article

Download Article

You can easily pigment both wooden and metal screen doors. All you need is some primer, pigment, and a brush. To get started, prop open your door and wipe information technology down with a cleaning solution. Then, apply an even layer of primer to your door, allow the glaze dry completely, and paint your door using multipurpose or door paint. Utilise additional layers of paint if you'd like, and y'all'll have a cute, freshly painted screen door!

1. i

   Prop your screen door open. You lot tin can prop your door open by sliding the internal hinge, or use an item like a chair to keep it open up. This allows yous to tin easily access the side edges.

   • This also prevents paint from accidentally getting on your entryway or forepart door.

2. two

   Wipe down your door with diluted household cleaner and a sponge. Pour 1–2  c (240–470 mL) of household cleaner into a modest saucepan, and make full it the rest of the way with warm water. Household cleaners are cleaning products designed for general hygiene purposes. Dip your sponge into the bucket, and wipe down your door. Rub your sponge in circular motions to pick upwards extra grime.^[1]

   • Dip your sponge into your bucket as you get, and then you use fresh cleaner each fourth dimension.
   • Practise this for both wooden and metallic doors. You lot tin apply the same household cleaner for either.

   Advert

3. 3

   Repair whatever existing holes if you are painting a wooden door. Use a spackling chemical compound and a putty knife to fill holes and dents less than ^one⁄_eight  in (0.32 cm) deep, or utilise a 2-office filler or epoxy wood filler for deeper holes. Follow the particular instructions outlined on your spackling chemical compound or wood filler. ^[2]

   • In general, you should apply the compound or filler directly to the hole from the container, and level off the surface by wiping a putty pocketknife over acme.
   • Instructions volition vary slightly based on what kind of hole repair compound you use. Ensure the compound fills the entire the hole!

4. 4

   Protect areas you don't want to paint with painter'southward tape. Rip pieces of painter'southward tape ii–6 in (5.one–15.2 cm) long, and stick them to spots on your door you don't want to get painted. In improver to your hardware and doorknob, you can run tape along the outer edges of your door so paint doesn't current of air up on your entryway. Keep placing tape around your door until all your intended surfaces are covered. You tin as well lay downwards a drib textile to help catch whatsoever paint drips.^[3]

   • Painter'due south tape is sticky plenty to attach to your door merely will non damage the surface beneath.
   • You lot can purchase painter's tape at dwelling house supply stores. Information technology is commonly bluish in color and is frequently called masking tape.

5. v

   Put on a mask or ventilator. Pigment fumes can exist harsh, and so information technology'due south important to protect yourself from them. Utilize a mask or ventilator when sanding, priming, and painting the door.

6. 6

   Sand the surface with 180-220 grit sandpaper if painting a wooden door. To get the smoothest layers of pigment possible, sand away any ridges or uneven surfaces. You tin likewise remove thick layers of previous paint by sanding your door. For all-time results, hand-sand the door with sandpaper, or you can also use a non-clogging sanding sponge. And then, sand until the surface of your door feels smooth.^[4]

   • Yous can as well wipe downwards the door with a clammy cloth after you lot sand to remove all the dust.^[5]
   • You can also sand metal screen doors with 220-dust sandpaper.^[6]

7. 7

   Utilise primer to your entire door before you paint it. Primer prevents stains, evens out your surfaces, and helps new pigment stick to your door. Purchase either oil-based primer for wooden doors or metal-safe primer for steel door frames. So, utilise a ¹⁄_ii –1 in (1.3–2.v cm) paintbrush virtually to apply an even layer over all of your door frame. Showtime at the top of your door, and paint with downwardly brush strokes.^[7]

   • Review the specific instructions on the container before you start.
   • A surface enamel primer works well for metallic surfaces.^[viii]

8. eight

   Permit your primer dry thoroughly for nearly 1-3 hours. Most primers dry out relatively apace in well-nigh an 60 minutes, though yous desire to ensure your door is completely dry earlier you lot paint it.^[9]

   • Drying times can vary because of cool temperatures and high humidity.

Advertizement

1. 1

   Employ multipurpose paint formulated for your type of door. It is of import to use paint that is made for the particular surface of your door. Visit a local home supply store, and read over the label of a multipurpose door paint and look for a "metal" or "wooden" option depending on what your door is made out of.

   • Some paints are great for many surfaces, while other paint is made for specifically metallic surfaces.
   • Alternatively, you can also discover paint specifically for doors at virtually home supply stores.

2. 2

   Choose a few paintbrushes in an appropriate size for your door. If your door frame has thick or wide sections, you can employ brushes ane–2 in (2.5–v.ane cm) broad. If your door frame is narrow or skinny, employ brushes near ^ane⁄₄ – ⁱ⁄₂  in (0.64–ane.27 cm) broad. This style, y'all avoid applying too much paint over the surface of your door. It is helpful to have a few different brushes to choose from.^[10]

   • Alternatively, use a mini roller for an extra-smooth finish.

3. 3

   Dip your brush into your pigment and apply information technology to your door frame. Place your bristles into your paint so the tips are covered, about ¹⁄₄ – ¹⁄_two  in (0.64–1.27 cm). Then, press your castor to your door starting at the top. Cover the top of your door frame, then piece of work your way down the door. Go along painting until all surfaces of your door are covered.

   • For best results, pigment in 1 consistent direction. Avoid going upward and down and then back and forth, as that often results in visible brush strokes.
   • Be careful not to scoop upward also much paint or douse your brush as well deep into the pigment. If you apply an excess of paint, information technology may run down your door.

4. 4

   Let the kickoff coat of paint dry for 30 minutes to two hours. To forbid streaking or brush strokes, information technology is best to let your pigment dry out completely in between coats. Your start coat should dry out completely within 2 hours or less.

5. five

   Employ boosted coats of paint as needed. After your starting time coat is dry, you can easily paint some other coat on your door. This helps create an even layer of paint without whatsoever transparent areas.^[11]

   • Drying fourth dimension will vary based on the atmospheric condition, but in general it takes near 30 minutes to 2 hours for a coat of pigment to dry.

6. six

   Remove the painter'southward tape immediately after you utilise your last coat. When the paint is still drying, pull up on the corner of your painter's tape, and peel it away from your door. If you get out your tape on while information technology dries, some of your edges may peel away with your record, causing uneven lines.^[12]

   • You want your paint to have a neat, direct edge when y'all elevator up the tape.

7. 7

   Expect 1-iii hours for your door to dry fully. After you've practical your last coat, information technology is best to go out your door undisturbed for a couple hours until it is fully dry. Go along your door propped open until your paint completely dries.

   • Leaving the door open until the pigment dries fully prevents smudges on the door frame.

Advert

Add together New Question

• Question

  Can I use business firm paint on my metal screen?

  

  Not a good idea. It's non going to gear up correctly, and it may not dry nicely.

Enquire a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Household cleaner
• Sponge
• Bucket
• Primer
• Paint
• Painter'due south record
• Paintbrushes

• Always wear a mask or ventilator when sanding, priming, and painting.

• Brand certain you cover whatever area you exercise not desire to paint with painter'due south record. That way, paint will non proceed your door where you don't want it.

Advertisement

Nigh This Article

Thank you to all authors for creating a folio that has been read 38,137 times.

Did this commodity help y'all?

Source: https://www.wikihow.com/Paint-a-Screen-Door

Share this post